Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

Blow-Thru Rotary Air Lock Valves

 
Blow-thru rotary valves are used for introducing fine free-flowing material into pneumatic conveying systems. The valves in this series have been designed for applications with certain non-abrasive materials, where the product required an assist to remove it from the vane pockets. Meets low headroom requirements. The valves itself becomes a direct component of the pneumatic system.
 
Valves for line sizes from 1 to 6 inches available. Fabricated or cast construction. Rotors are eight-vane, partially-filled type. Fabricated construction. Rotors with adjustable tips are available as an option. Inspection ports can be supplied and are recommended when adjustable tip rotors are used.
 
Rectangular blow-thru valves are used for systems requiring greater capacity without increasing the overall height. Standard models are available in double widths other sizes can be supplied on special order.
 
Features -
  • Operation :- heavy-duty operation to 15 psig, and temperatures up to 250 f.
  • Construction :- cast iron, fabricated carbon steel or stainless steel.
  • Rotor :- 8 vanes, open ends, fabricated construction. Types : partially-filled, with or without adjustable tips . Oblique v-shaped cross section .
  • Flange :- square or round inlets.
  • Blow-thru line :- supplied with plain ends for compression couplings.
  • Bearings :- sealed, heavy duty, ball bearings.
  • Packing :- three ring shaft packing glands with square braided asbestos and teflon .
  • Drive :- first quality, parallel-shaft gear motor, side mounted, 3 phase. 60 hertz, 230 ‚€“ 460 volt, totally enclosed includes : sprockets, roller chain, and safety guard.
Notes -
 
Blow-thru valves are available in either cast or fabricated construction. Inspection ports are available if specified on fabricated models only. Inspection ports are recommended for use with adjustable tip rotors.
 
We will ship valves to “standard specifications” as shown, unless other wise specified
 
Square or round inlets are standard. Blow-thru lines are furnished with plain ends for compression couplings. Flanges can be furnished if specified.
 
Valve size based on blow-thru line size and flange dimensions . Eg,
 
For style 1 valves -
  • 1st designation - line size (o.D.) in inches;
  • 2nd designation - “bt” for blo-thru valve;
  • 3rd designation - valve flange size in inches.
  • Capacity is based on partially filled rotors
 
Blow-Thru Rotary Air Lock Valves
 
 
 
 
 
Products Links
Rotary Air Lock Valve | Side Entry Rotary Airlock Valve | Blow-Thru Rotary Air Lock Valves | Quick Opening Rotary Air Lock Valve | Slide Gate | Volumetric Screw Feeder | Ribbon Blender | Screw Conveyor | Roller Conveyor | Ball Table Conveyor | Pug Mill Conditioner | Lump Breaker | Double Flap Valve
 
Digidale Conveyors Pvt. Ltd.
Address : No. 19, Anant Niwas, Raj Tailor Corner, Rabod - 2 Thane - 400601, Maharashtra, India. Telephone No. : 022 - 2544 0958 / 2582 1417.
Fax :
(022) 2583 7918.
 
Home | Profile | Products | Clients | Contact Us | Enquiry
Designed & Hosted by : MID    Promoted by : GID